Specifications

Index
L
power switch See power button/LED assembly;
Power On/Standby button
LED shield
powering down the server 2-4
part number 1-2
Power-On Self-Test 3-3
removing and replacing 2-30
processor
LEDs
part number 1-4
front panel 4-2
removing and replacing 2-10
rear panel 4-5
processor failure LEDs 4-9
system board 4-9
processor fan See heatsink/fan assembly
processor fan connectors 4-6
M
processor power connector LEDs 4-9
processor retention brackets
management agents 3-3
part number 1-2
mechanical components 1-1
removing and replacing 2-12
media bay drive tray
processor sockets, location 4-6
part number 1-2
removing and replacing 2-20
R
media bays See removable media bays
media components 4-3
rack warnings 2-2
memory module See DIMMs
rear panel
miscellaneous plastics kit, part number 1-2
components 4-4
mouse connector 4-4
LEDs 4-5
Remote Insight connector 4-6
N
removable media bay devices, removing and
replacing 2-28
NIC
removable media bays
LEDs 4-2, 4-5
dimensions 4-3
specifications 5-7
locating 4-3
removable media bezel blank, part number 1-2
O
removing and replacing
access panel 2-7
Online ROM Flash Component Utility 3-6
air baffle 2-8
Option ROM Configuration for Arrays (ORCA) 3-3
battery 2-34
overtemperature LEDs 4-9
bezel blank 2-6
DIMMs 2-9
P
expansion slot retainer 2-33
fan, system 2-13
parallel connector 4-4
front bezel 2-5
part numbers
hard drive compartment 2-21, 2-22
mechanical components 1-2
hard drives 2-23
system components 1-4
heatsink/fan assembly 2-10
plastics kit, miscellaneous 1-2
LED shield 2-30
power button/LED assembly
media bay drive tray 2-20
connector 4-6
power button/LED assembly 2-29
part number 1-4
power supply 2-15
removing and replacing 2-29
processor 2-10
power cable kit, part number 1-4
processor retention brackets 2-12
power connector 4-4
removable media bay devices 2-28
power extension cable, part number 1-4
system board 2-35
Power On/Standby button 4-1
system fan 2-13
power shield cable, part number 1-4
resources viii, 3-6
power supply
return kit, part number 1-5
part number 1-4
RJ-45 connector 4-4
removing and replacing 2-15
ROM flashing 3-4
weight caution 2-15
ROM-Based Setup Utility (RBSU) 3-3
power supply connectors, system board 4-6
ROMPaq Utility 3-4
HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide Index-3