User's Manual

Serial interface 43
Factory Default submenu
Option number Submenu Description
1 Set to Factory Default Set the management module to factory
default.
2 Product ID MCS Set the MCS unit product ID.
3 Serial Number MCS Set the MCS unit serial number.
Configuring HyperTerminal
1. From the Microsoft® Windows® desktop menu, click Start>All
Programs>Accessories>Communication>HyperTerminal. The Connection Description window
appears.
2. Enter a description and select an icon for the connection. The Connect To window appears.
3. Select the Com port through which to connect. The Com Properties window appears.
4. Select the following parameter values.
Parameter Value
Transmission rate 9600 Bps
Data bits 8
Parity None
Stop bits 1
Flow control None