User's Manual

Index 83
A
accessing the management module 32, 33
adjusting operator display 45, 55
Air temperature sensor failed 45
alarm relay 35
Alarms and warnings 45
authorized reseller 68
Automatic Door Release Kit 57
C
Communication failure 45
condensation management 67
configuration factors 7
configuration utilities 37
configuring HyperTerminal 43
configuring Minicom 44
customer self repair (CSR) 68
E
environmental specifications 62
F
factory default settings 43
Fan unit failed 45
Fan unit not installed 45
frequently asked questions 58
H
Heat overload condition (High Temperature Threshold
field) 45, 67
HEX temperature in failed (Server Intake Temperature
failed) 45
HEX temperature out failed (Server Exhaust
Temperature failed) 45
HyperTerminal, configuring 43
I
Info & Updates menu 42
installation instructions 8, 10
installation, management card 8
installing hardware 10
IP address, configuring 25
IP addresses, setting up 25, 40
K
kit contents 8, 9
L
Leak detector sensor is not working properly 45
Leakage detected 45
LEDs, troubleshooting 58, 60
leveling requirements 66
Low water flow 45
M
main menu functions 38
maintenance 63
management module 30, 32, 33
management module components 31
Minicom, configuring 44
N
networking, configuration 39
O
operator display 45
optimum environment 7
overview, product 5
P
passwords 41
powering up 16
product overview 5
R
replaceable spare parts 63
required tools 9
S
serial interface 37
Index