HP Smart Array Cluster Storage System

Hardware Options Installation
HP Smart Array Cluster Storage System User Guide 3-7
HP CONFIDENTIAL
Writer: Rob Weaver File Name: d-ch3 Hardware Options Installation
Codename: Aurora Part Number: 240333-003 Last Saved On: 11/6/02 1:04 PM
3. Install the tape drive.
CAUTION: Data loss can occur if the drive is not firmly seated.
4-Port Shared Storage Module Option
The Smart Array Cluster Storage system ships standard with a 2-Port Shared Storage
Module. To upgrade the unit and enable data transfer through four SCSI ports, install
the optional 4-Port Shared Storage Module. The module requires the latest versions
of firmware for the module, the Smart Array Cluster Storage Controller, and the host
array controllers.
To install the module:
1. Power down the system. Refer to “System Power Down” in this chapter.
2. Disconnect the SCSI cabling connected to the 2-Port Shared Storage Module.