Command Reference Guide

SNMP Commands
CLI Command Reference
September 2014 Page 102
HP Moonshot Switch Module CLI Command Reference
no snmp-server enable traps violation
This command disables the sending of new violation traps.
snmp-server enable traps
This command enables the Authentication Flag.
no snmp-server enable traps
This command disables the Authentication Flag.
snmp trap link-status
This command enables link status traps on an interface or range of interfaces.
no snmp trap link-status
This command disables link status traps by interface.
Mode • Global Config
•Interface Config
Format
no snmp-server enable traps violation
Mode Interface Config
Default enabled
Format
snmp-server enable traps
Mode Global Config
Format
no snmp-server enable traps
Mode Global Config
Format
snmp trap link-status
Mode Interface Config
Note: This command is valid only when the Link Up/Down Flag is enabled.
Format
no snmp trap link-status
Mode Interface Config