Command Reference Guide

SNMP Commands
CLI Command Reference
September 2014 Page 112
HP Moonshot Switch Module CLI Command Reference
show snmp filters
This command displays the configured filters used when sending traps.
show snmp group
This command displays the configured groups.
show snmp source-interface
Use this command in Privileged EXEC mode to display the configured global source-interface (Source IP
address) details used for an SNMP client.
Example: The following shows example CLI display output for the command.
(Routing)# show snmp source-interface
SNMP trap Client Source Interface.............. (not configured)
Format
show snmp filters [filtername]
Mode Privileged EXEC
Parameter Description
Name The filter name for this entry.
OID Tree The OID tree this entry will include or exclude.
Type Indicates if this entry includes or excludes the OID Tree.
Format
show snmp group [groupname]
Mode Privileged EXEC
Parameter Description
Name The name of the group.
Security Model Indicates which protocol can access the system via this group.
Security Level Indicates the security level allowed for this group.
Read View The view this group provides read access to.
Write View The view this group provides write access to.
Notify View The view this group provides trap access to.
Format
show snmp source-interface
Mode Privileged Exec