Command Reference Guide

RADIUS Commands
CLI Command Reference
September 2014 Page 121
HP Moonshot Switch Module CLI Command Reference
radius server timeout
This command configures the global parameter for the RADIUS client that specifies the timeout value (in
seconds) after which a request must be retransmitted to the RADIUS server if no response is received. The
timeout value is an integer in the range of 1 to 30.
no radius server timeout
The no version of this command sets the timeout global parameter to the default value.
show radius
This command displays the values configured for the global parameters of the RADIUS client.
Default 5
Format
radius server timeout seconds
Mode Global Config
Field Description
retries Maximum number of transmission attempts in the range 1–30.
Format
no radius server timeout
Mode Global Config
Format
show radius
Mode Privileged EXEC
Term Definition
Number of Configured
Authentication Servers
The number of RADIUS Authentication servers that have been
configured.
Number of Configured Accounting
Servers
The number of RADIUS Accounting servers that have been configured.
Number of Named Authentication
Server Groups
The number of configured named RADIUS server groups.
Number of Named Accounting
Server Groups
The number of configured named RADIUS server groups.
Number of Retransmits The configured value of the maximum number of times a request packet
is retransmitted.
Time Duration The configured timeout value, in seconds, for request re-transmissions.
RADIUS Accounting Mode A global parameter to indicate whether the accounting mode for all the
servers is enabled or not.