Command Reference Guide

RADIUS Commands
CLI Command Reference
September 2014 Page 122
HP Moonshot Switch Module CLI Command Reference
Example: The following shows example CLI display output for the command.
(Routing) #show radius
Number of Configured Authentication Servers............. 32
Number of Configured Accounting Servers................. 32
Number of Named Authentication Server Groups............ 15
Number of Named Accounting Server Groups................ 3
Number of Retransmits................................... 4
Time Duration........................................... 10
RADIUS Accounting Mode.................................. Disable
RADIUS Attribute 4 Mode................................. Enable
RADIUS Attribute 4 Value ............................... 192.168.37.60
show radius servers
This command displays the summary and details of RADIUS authenticating servers configured for the RADIUS
client.
RADIUS Attribute 4 Mode A global parameter to indicate whether the NAS-IP-Address attribute has
been enabled to use in RADIUS requests.
RADIUS Attribute 4 Value A global parameter that specifies the IP address to be used in the NAS-IP-
Address attribute to be used in RADIUS requests.
Format
show radius servers [{ipaddr|dnsname | name [servername]}]
Mode Privileged EXEC
Field Description
ipaddr The IP address of the authenticating server.
dnsname The DNS name of the authenticating server.
servername The alias name to identify the server.
Current The * symbol preceding the server host address specifies that the server is currently active.
Host Address The IP address of the host.
Server Name The name of the authenticating server.
Port The port used for communication with the authenticating server.
Type Specifies whether this server is a primary or secondary type.
Current Host
Address
The IP address of the currently active authenticating server.
Secret Configured Yes or No Boolean value that indicates whether this server is configured with a secret.
Number of
Retransmits
The configured value of the maximum number of times a request packet is retransmitted.
Message
Authenticator
A global parameter to indicate whether the Message Authenticator attribute is enabled or
disabled.
Time Duration The configured timeout value, in seconds, for request retransmissions.
Term Definition