Command Reference Guide

RADIUS Commands
CLI Command Reference
September 2014 Page 126
HP Moonshot Switch Module CLI Command Reference
Malformed Responses........................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
(Routing) #show radius accounting statistics name Default_RADIUS_Server
RADIUS Accounting Server Name................. Default_RADIUS_Server
Host Address.................................. 192.168.37.200
Round Trip Time............................... 0.00
Requests...................................... 0
Retransmissions............................... 0
Responses..................................... 0
Malformed Responses........................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
show radius source-interface
Use this command in Privileged EXEC mode to display the configured RADIUS client source-interface (Source IP
address) information.
Example: The following shows example CLI display output for the command.
(Routing)# show radius source-interface
RADIUS Client Source Interface.............. (not configured)
show radius statistics
This command displays the summary statistics of configured RADIUS Authenticating servers.
Format
show radius source-interface
Mode Privileged Exec
Format
show radius statistics {ipaddr|dnsname | name servername}
Mode Privileged EXEC
Term Definition
ipaddr The IP address of the server.
dnsname The DNS name of the server.
servername The alias name to identify the server.