Command Reference Guide

TACACS+ Commands
CLI Command Reference
September 2014 Page 132
HP Moonshot Switch Module CLI Command Reference
port
Use the port command in TACACS Configuration mode to specify a server port number. The server port-number
range is 0 - 65535.
priority (TACACS Config)
Use the priority command in TACACS Configuration mode to specify the order in which servers are used,
where 0 (zero) is the highest priority. The
priority parameter specifies the priority for servers. The highest
priority is 0 (zero), and the range is 0 - 65535.
timeout
Use the timeout command in TACACS Configuration mode to specify the timeout value in seconds. If no
timeout value is specified, the global value is used. The
timeout parameter has a range of 1-30 and is the
timeout value in seconds.
Default 49
Format
port port-number
Mode TACACS Config
Default 0
Format
priority priority
Mode TACACS Config
Format
timeout timeout
Mode TACACS Config