Command Reference Guide

TACACS+ Commands
CLI Command Reference
September 2014 Page 133
HP Moonshot Switch Module CLI Command Reference
show tacacs
Use the show tacacs command to display the configuration, statistics, and source interface details of the
TACACS+ client.
show tacacs source-interface
Use the show tacacs source-interface command in Global Config mode to display the configured global
source interface details used for a TACACS+ client. The IP address of the selected interface is used as source IP
for all communications with the server.
Example: The following shows example CLI display output for the command.
(Config)# show tacacs source-interface
TACACS Client Source Interface : loopback 0
TACACS Client Source IPv4 Address : 1.1.1.1 [UP]
Format
show tacacs [ip-address|hostname]
Mode Privileged EXEC
Term Definition
Host address The IP address or hostname of the configured TACACS+ server.
Port The configured TACACS+ server port number.
TimeOut The timeout in seconds for establishing a TCP connection.
Priority The preference order in which TACACS+ servers are contacted. If a server connection fails,
the next highest priority server is contacted.
Format
show tacacs source-interface
Mode Privileged EXEC