Command Reference Guide

System Information and Statistics Commands
CLI Command Reference
September 2014 Page 149
HP Moonshot Switch Module CLI Command Reference
show hardware
This command displays inventory information for the switch.
show environment
This command displays information about the temperature and status of the power supplies and fans in the
system chassis.
Example: The following example shows the output of the
show environment command:
Temp (C)....................................... 65
Temperature traps range: 0 to 45 degrees (Celsius)
Temperature Sensors:
Unit Sensor Description Temp (C) State Max_Temp (C)
---- ------ ---------------- ---------- -------------- --------------
1 1 Faceplate,local 34 Normal 34
1 2 Faceplate,remote 32 Normal 32
1 3 Fabric 65 Normal 66
1 4 Management board 51 Normal 54
1 5 CPU 31 Normal 32
1 6 SODIMM 0 Normal 0
2 1 Faceplate,local 30 Normal 30
2 2 Faceplate,remote 29 Normal 29
2 3 Fabric 47 Normal 48
2 4 Management board 42 Normal 44
2 5 CPU 25 Normal 26
2 6 SODIMM 26 Normal 27
Note: The show version command and the show hardware command display the same information.
In future releases of the software, the
show hardware command will not be available. For a description
of the command output, see the command “show version” on page 150.
Format
show hardware
Mode Privileged EXEC
Format
show environment
Mode Privileged EXEC