Command Reference Guide

System Information and Statistics Commands
CLI Command Reference
September 2014 Page 151
HP Moonshot Switch Module CLI Command Reference
show platform vpd
This command displays vital product data for the switch.
The following information is displayed.
Example: The following shows example CLI display output for the command.
(Routing) #show platform vpd
Operational Code Image File Name............... hadleyr8v13m11b17
Software Version............................... 8.13.11.17
Timestamp...................................... Tue Aug 13 11:17:36 EDT 2013:
show interface
This command displays a summary of statistics for a specific interface or a count of all CPU traffic based upon
the argument.
The display parameters, when the argument is
unit/slot/port, are as follows:
Format
show platform vpd
Mode User Privileged
Term Definition
Operational Code
Image File Name
Build Signature loaded into the switch
Software Version Release Version Maintenance Level and Build (RVMB) information of the switch.
Timestamp Timestamp at which the image is built
Format
show interface {unit/slot/port | switchport}
Mode Privileged EXEC
Parameters Definition
Packets Received
Without Error
The total number of packets (including broadcast packets and multicast packets)
received by the processor.
Packets Received With
Error
The number of inbound packets that contained errors preventing them from being
deliverable to a higher-layer protocol.
Broadcast Packets
Received
The total number of packets received that were directed to the broadcast address.
Note that this does not include multicast packets.
Receive Packets
Discarded
The number of inbound packets which were chosen to be discarded even though
no errors had been detected to prevent their being deliverable to a higher-layer
protocol. One possible reason for discarding such a packet could be to free up
buffer space.
Packets Transmitted
Without Error
The total number of packets transmitted out of the interface.