Command Reference Guide

System Information and Statistics Commands
CLI Command Reference
September 2014 Page 154
HP Moonshot Switch Module CLI Command Reference
When you specify a value for unit/slot/port, the command displays the following information.
Term Definition
Packets Received • Total Packets Received (Octets) - The total number of octets of data (including those in
bad packets) received on the network (excluding framing bits but including Frame
Check Sequence (FCS) octets). This object can be used as a reasonable estimate of
Ethernet utilization. If greater precision is desired, the etherStatsPkts and
etherStatsOctets objects should be sampled before and after a common interval. The
result of this equation is the value Utilization which is the percent utilization of the
Ethernet segment on a scale of 0 to 100 percent.
• Packets Received 64 Octets - The total number of packets (including bad packets)
received that were 64 octets in length (excluding framing bits but including FCS octets).
• Packets Received 65–127 Octets - The total number of packets (including bad packets)
received that were between 65 and 127 octets in length inclusive (excluding framing
bits but including FCS octets).
• Packets Received 128–255 Octets - The total number of packets (including bad packets)
received that were between 128 and 255 octets in length inclusive (excluding framing
bits but including FCS octets).
Packets Received
(con’t)
• Packets Received 256–511 Octets - The total number of packets (including bad packets)
received that were between 256 and 511 octets in length inclusive (excluding framing
bits but including FCS octets).
• Packets Received 512–1023 Octets - The total number of packets (including bad
packets) received that were between 512 and 1023 octets in length inclusive (excluding
framing bits but including FCS octets).
• Packets Received 1024–1518 Octets - The total number of packets (including bad
packets) received that were between 1024 and 1518 octets in length inclusive
(excluding framing bits but including FCS octets).
• Packets Received > 1518 Octets - The total number of packets received that were longer
than 1522 octets (excluding framing bits, but including FCS octets) and were otherwise
well formed.
• Packets RX and TX 64 Octets - The total number of packets (including bad packets)
received and transmitted that were 64 octets in length (excluding framing bits but
including FCS octets).
• Packets RX and TX 65–127 Octets - The total number of packets (including bad packets)
received and transmitted that were between 65 and 127 octets in length inclusive
(excluding framing bits but including FCS octets).
• Packets RX and TX 128–255 Octets - The total number of packets (including bad
packets) received and transmitted that were between 128 and 255 octets in length
inclusive (excluding framing bits but including FCS octets).
• Packets RX and TX 256–511 Octets - The total number of packets (including bad
packets) received and transmitted that were between 256 and 511 octets in length
inclusive (excluding framing bits but including FCS octets).