Command Reference Guide

System Information and Statistics Commands
CLI Command Reference
September 2014 Page 160
HP Moonshot Switch Module CLI Command Reference
show interface lag
Use this command to display configuration information about the specified LAG interface.
Format
show interface lag lag-intf-num
Mode Privileged EXEC
Parameters Definition
Packets Received
Without Error
The total number of packets (including broadcast packets and multicast packets)
received on the LAG interface
Packets Received With
Error
The number of inbound packets that contained errors preventing them from being
deliverable to a higher-layer protocol.
Broadcast Packets
Received
The total number of packets received that were directed to the broadcast address.
Note that this does not include multicast packets.
Receive Packets
Discarded
The number of inbound packets which were chosen to be discarded even though
no errors had been detected to prevent their being deliverable to a higher-layer
protocol. One possible reason for discarding such a packet could be to free up
buffer space.
Packets Transmitted
Without Error
The total number of packets transmitted out of the LAG.
Transmit Packets
Discarded
The number of outbound packets which were chosen to be discarded even though
no errors had been detected to prevent their being deliverable to a higher-layer
protocol. A possible reason for discarding a packet could be to free up buffer space.
Transmit Packets Errors The number of outbound packets that could not be transmitted because of errors.
Collisions Frames The best estimate of the total number of collisions on this Ethernet segment.
Time Since Counters Last
Cleared
The elapsed time, in days, hours, minutes, and seconds since the statistics for this
LAG were last cleared.