Command Reference Guide

System Information and Statistics Commands
CLI Command Reference
September 2014 Page 166
HP Moonshot Switch Module CLI Command Reference
show process app-list
This command displays the user and system applications.
Example: The following shows example CLI display output for the command.
(Routing) #show process app-list
Admin Auto Running
ID Name PID Status Restart Status
---- ---------------- ----- --------- --------- --------
1 switchdrvr 251 Enabled Disabled Running
2 syncdb 252 Enabled Disabled Running
3 syncdb-test 0 Disabled Disabled Stopped
4 proctest 0 Disabled Enabled Stopped
5 utelnetd 0 Disabled Disabled Stopped
6 lxshTelnetd 0 Disabled Disabled Stopped
7 user.start 0 Enabled Disabled Stopped
show process app-resource-list
This command displays the configured and in-use resources of each application.
Format
show process app-list
Mode Privileged EXEC
Parameter Description
ID The application identifier.
Name The name that identifies the process.
PID The number the software uses to identify the process.
Admin Status The administrative status of the process.
Auto Restart Indicates whether the process will automatically restart if it stops.
Running Status Indicates whether the process is currently running or stopped.
Format
show process app-resource-list
Mode Privileged EXEC
Parameter Description
ID The application identifier.
Name The name that identifies the process.
PID The number the software uses to identify the process.
Memory Limit The maximum amount of memory the process can consume.
CPU Share The maximum percentage of CPU utilization the process can consume.