Command Reference Guide

System Information and Statistics Commands
CLI Command Reference
September 2014 Page 168
HP Moonshot Switch Module CLI Command Reference
show process cpu
This command provides the percentage utilization of the CPU by different tasks.
Example: The following shows example CLI display output for the command.
(Routing) #show process cpu
Memory Utilization Report
status bytes
------ ----------
free 1637306368
alloc 473403392
CPU Utilization:
PID Name 5 Secs 60 Secs 300 Secs
------- -------------------- ---------- ---------- ----------
24 (kmmcd) 4.99% 4.51% 4.47%
208 (procmgr) 0.00% 0.01% 0.00%
262 envMonitorTask 0.19% 0.12% 0.12%
287 osapiTimer 0.00% 0.04% 0.03%
290 bcmINTR 0.09% 0.14% 0.13%
291 socdmadesc.0 0.19% 0.13% 0.12%
292 socdmadesc.1 0.09% 0.12% 0.12%
296 bcmL2X.0 4.11% 4.04% 4.02%
297 bcmCNTR.0 1.07% 0.97% 0.97%
301 bcmL2X.1 4.11% 4.01% 4.01%
302 bcmCNTR.1 0.88% 0.96% 0.97%
305 bcmRX 0.09% 0.24% 0.23%
306 bcmNHOP 0.00% 0.01% 0.00%
307 bcmATP-TX 0.00% 0.03% 0.03%
308 bcmATP-RX 0.00% 0.03% 0.03%
318 bcmLINK.0 2.35% 2.41% 2.41%
319 bcmLINK.1 2.54% 2.63% 2.66%
320 cpuUtilMonitorTask 0.19% 0.10% 0.09%
328 simPts_task 0.00% 0.01% 0.01%
346 emWeb 0.00% 0.01% 0.01%
352 trafficStormControl 0.00% 0.01% 0.00%
355 DHCP snoop 0.00% 0.01% 0.00%
368 dot1s_timer_task 0.00% 0.17% 0.13%
382 snoopTask 0.09% 0.02% 0.02%
395 spmTask 0.00% 0.01% 0.01%
420 lldpTask 0.09% 0.01% 0.00%
425 isdpTask 0.00% 0.01% 0.01%
427 RMONTask 0.19% 0.79% 0.77%
433 mvrpTask 0.09% 0.28% 0.23%
------- -------------------- ---------- ---------- ----------
Total CPU Utilization 21.45% 21.96% 21.81%
Note: It is not necessarily the traffic to the CPU, but different tasks that keep the CPU busy.
Format
show process cpu
Mode Privileged EXEC