Command Reference Guide

System Information and Statistics Commands
CLI Command Reference
September 2014 Page 172
HP Moonshot Switch Module CLI Command Reference
show factory-defaults
This command displays the content of the factory-defaults file, which is a text-based configuration file. The
factory-defaults file is saved compressed in flash. With this command, the file is decompressed while displaying
its content.
length value
Use this command to set the pagination length to value number of lines for the sessions specified by
configuring on different Line Config modes (telnet/ssh/console) and is persistent.
Example: Length command on Line Console mode applies for Serial Console session.
no length value
Use this command to set the pagination length to the default value number of lines.
terminal length
Use this command to set the pagination length to value number of lines for the current session. This command
configuration takes an immediate effect on the current session and is nonpersistent.
no terminal length
Use this command to set the value to the length value configured on Line Config mode depending on the type
of session.
Format
show factory-defualts
Mode Privileged EXEC
Default
24
Format
length value
Mode Line Config
Format
no length value
Mode Line Config
Default 24 lines per page
Format
terminal length value
Mode Privileged EXEC
Format
no terminal length value
Mode Privileged EXEC