Command Reference Guide

System Information and Statistics Commands
CLI Command Reference
September 2014 Page 173
HP Moonshot Switch Module CLI Command Reference
show terminal length
Use this command to display all the configured terminal length values.
Example: The following shows example CLI display output for the command.
(Routing) #show terminal length
Terminal Length:
----------------------
For Current Session………………….. 24
For Serial Console…………………… 24
For Telnet Sessions…………………... 24
For SSH Sessions…………………….. 24
memory free low-watermark processor
Use this command to get notifications when the CPU free memory falls below the configured threshold. A
notification is generated when the free memory falls below the threshold. Another notification is generated
once the available free memory rises to 10 percent above the specified threshold. To prevent generation of
excessive notifications when the CPU free memory fluctuates around the configured threshold, only one Rising
or Falling memory notification is generated over a period of 60 seconds. The threshold is specified in kilobytes.
The CPU free memory threshold configuration is saved across a switch reboot.
Format
show terminal length
Mode Privileged EXEC
Format
memory free low-watermark processor 1-2061240
Mode Global Config
Parameter Description
low-watermark When CPU free memory falls below this threshold, a notification message is triggered. The
range is 1 to the maximum available memory on the switch. The default is 0 (disabled).