Command Reference Guide

Logging Commands
CLI Command Reference
September 2014 Page 176
HP Moonshot Switch Module CLI Command Reference
Logging Commands
This section describes the commands you use to configure system logging, and to view logs and the logging
settings.
logging buffered
This command enables logging to an in-memory log.
no logging buffered
This command disables logging to the in-memory log.
logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full capacity. Otherwise when
the log file reaches full capacity, logging stops.
no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop when the log file
capacity is full.
Default disabled; critical when enabled
Format
logging buffered
Mode Global Config
Format
no logging buffered
Mode Global Config
Default enabled
Format
logging buffered wrap
Mode Privileged EXEC
Format
no logging buffered wrap
Mode Privileged EXEC