Command Reference Guide

Logging Commands
CLI Command Reference
September 2014 Page 177
HP Moonshot Switch Module CLI Command Reference
logging cli-command
This command enables the CLI command logging feature, which enables the HP Moonshot Switch Module
software to log all CLI commands issued on the system.
no logging cli-command
This command disables the CLI command Logging feature.
logging console
This command enables logging to the console. You can specify the severitylevel value as either an integer
from 0 to 7 or symbolically through one of the following keywords:
emergency (0), alert (1), critical (2), error
(3),
warning (4), notice (5), info (6), or debug (7).
no logging console
This command disables logging to the console.
Default enabled
Format
logging cli-command
Mode Global Config
Format
no logging cli-command
Mode Global Config
Default disabled; critical when enabled
Format
logging console [severitylevel]
Mode Global Config
Format
no logging console
Mode Global Config