Command Reference Guide

Logging Commands
CLI Command Reference
September 2014 Page 178
HP Moonshot Switch Module CLI Command Reference
logging host
This command configures the logging host parameters. You can configure up to eight hosts.
Example: The following shows examples of the command.
(Routing) (Config)# logging host google.com dns 214
(Routing) (Config)# logging host 10.130.64.88 ipv4 214 6
(Routing) (Config)# logging host 2000::150 ipv6 214 7
logging host reconfigure
This command enables logging host reconfiguration.
Default •port—514
•level—critical (2)
Format
logging host {hostaddress|hostname} addresstype {port severitylevel}
Mode Global Config
Parameter Description
hostaddress|host
name
The IP address of the logging host.
address-type Indicates the type of address ipv4 or ipv6 or dns being passed.
port A port number from 1 to 65535.
severitylevel Specify this value as either an integer from 0 to 7, or symbolically through one of the
following keywords:
emergency (0), alert (1), critical (2), error (3), warning (4), notice (5),
info (6), or debug (7).
Format
logging host reconfigure hostindex
Mode Global Config
Parameter Description
hostindex Enter the Logging Host Index for which to change the IP address.