Command Reference Guide

Command Modes
CLI Command Reference
September 2014 Page 18
HP Moonshot Switch Module CLI Command Reference
Line Telnet
(Routing) (config-telnet)#
Contains commands to configure telnet
login/enable authentication.
AAA IAS User
Config
(Routing) (Config-IAS-User)#
Allows password configuration for a user in
the IAS database.
Mail Server Config
(Routing) (Mail-Server)#
Allows configuration of the email server.
Time Range Config
(Routing) (config-time-range)#
Allows configuration of periodic and absolute
entries in within a named time range.
Policy Map
Config
(Routing) (Config-policy-map)#
Contains the QoS Policy-Map configuration
commands.
Policy Class
Config
(Routing) (Config-policy-class-map)#
Consists of class creation, deletion, and
matching commands. The class match
commands specify Layer 2, Layer 3, and
general match criteria.
Class Map Config
(Routing) (Config-class-map)#
Contains the QoS class map configuration
commands for IPv4.
Ipv6_Class-Map
Config
(Routing) (Config-class-map)#
Contains the QoS class map configuration
commands for IPv6.
Router OSPF
Config
(Routing) (Config-router)#
Contains the OSPF configuration commands.
Router RIP Config
(Routing) (Config-router)#
Contains the RIP configuration commands.
IPv4 ACL Config
(Routing) (Config-ipv4-acl)#
Allows you to create a IPv4 ACL and configure
rules for the ACL.
IPv6 ACL Config
(Routing) (Config-ipv6-acl)#
Allows you to create a IPv4 ACL and configure
rules for the ACL.
MAC Access-list
Config
(Routing) (Config-mac-access-list)#
Allows you to create a MAC Access-List and to
enter the mode containing MAC Access-List
configuration commands.
Management ACL
Config
(Routing) (config-macal)#
Allows you to create a management ACL and
configure rules for the ACL.
TACACS Config
(Routing) (Tacacs)#
Contains commands to configure properties
for the TACACS servers.
Stack Global
Config Mode
(Routing) (Config stack)#
Allows you to access the Stack Global Config
Mode.
ARP Access-List
Config Mode
(Routing) (Config-arp-access-list)#
Contains commands to add ARP ACL rules in
an ARP Access List.
Support Mode
(Routing) (Support)#
Allows access to the support commands,
which should only be used by the
manufacturer's technical support personnel
as improper use could cause unexpected
system behavior and/or invalidate product
warranty.
Data Center
Bridging
(Routing) (config-if-dcb)#
Allows access to priority flow control (PFC)
commands for an interface.
Table 5: CLI Command Modes (Cont.)
Command Mode Prompt Mode Description