Command Reference Guide

Logging Commands
CLI Command Reference
September 2014 Page 181
HP Moonshot Switch Module CLI Command Reference
Example: The following shows example CLI display output for the command.
(Routing) #show logging
Logging Client Local Port : 514
Logging Client Source Interface : (not configured)
CLI Command Logging : disabled
Console Logging : enabled
Console Logging Severity Filter : error
Buffered Logging : enabled
Persistent Logging : disabled
Persistent Logging Severity Filter : alert
Syslog Logging : disabled
Log Messages Received : 1010
Log Messages Dropped : 0
Log Messages Relayed : 0
Term Definition
Logging Client Local
Port
Port on the collector/relay to which syslog messages are sent.
Logging Client Source
Interface
Shows the configured syslog source-interface (source IP address).
CLI Command Logging Shows whether CLI Command logging is enabled.
Console Logging Shows whether console logging is enabled.
Console Logging
Severity Filter
The minimum severity to log to the console log. Messages with an equal or lower
numerical severity are logged.
Buffered Logging Shows whether buffered logging is enabled.
Persistent Logging Shows whether persistent logging is enabled.
Persistent Logging
Severity Filter
The minimum severity at which the logging entries are retained after a system
reboot.
Syslog Logging Shows whether syslog logging is enabled.
Log Messages Received Number of messages received by the log process. This includes messages that are
dropped or ignored.
Log Messages Dropped Number of messages that could not be processed due to error or lack of resources.
Log Messages Relayed Number of messages sent to the collector/relay.