Command Reference Guide

Logging Commands
CLI Command Reference
September 2014 Page 183
HP Moonshot Switch Module CLI Command Reference
show logging persistent
Use the show logging persistent command to display persistent log entries.
Example: The following shows example CLI display output for the command.
(Routing) #show logging persistent
Persistent Logging : disabled
Persistent Log Count : 0
show logging traplogs
This command displays SNMP trap events and statistics.
clear logging buffered
This command clears all entries from the buffered log.
Format
show logging persistent
Mode Privileged EXEC
Parameter Description
Persistent
Logging
Persistent Log
Count
The number of persistent log entries.
Format
show logging traplogs
Mode Privileged EXEC
Term Definition
Number of Traps Since Last Reset The number of traps since the last boot.
Trap Log Capacity The number of traps the system can retain.
Number of Traps Since Log Last
Viewed
The number of new traps since the command was last executed.
Log The log number.
System Time Up How long the system had been running at the time the trap was sent.
Trap The text of the trap message.
Format
clear logging buffered
Mode Privileged EXEC