Command Reference Guide

Device Location, System Utility, and Clear Commands
CLI Command Reference
September 2014 Page 196
HP Moonshot Switch Module CLI Command Reference
Example: IPv4 ping failure:
In Case of Unreachable Destination:
(Routing) # ping 192.168.254.222 count 3 interval 1 size 255
Pinging 192.168.254.222 with 255 bytes of data:
Received Response: Unreachable Destination
Received Response :Unreachable Destination
Received Response :Unreachable Destination
----192.168.254.222 PING statistics----
3 packets transmitted,3 packets received, 0% packet loss
round-trip (msec) min/avg/max = 0/0/0
In Case Of Request TimedOut:
(Routing) # ping 1.1.1.1 count 1 interval 3
Pinging 1.1.1.1 with 0 bytes of data:
----1.1.1.1 PING statistics----
1 packets transmitted,0 packets received, 100% packet loss
round-trip (msec) min/avg/max = 0/0/0
quit
This command closes the current telnet connection or resets the current serial connection. The system asks
you whether to save configuration changes before quitting.
reload
This command resets the switch without powering it off. Reset means that all network connections are
terminated and the boot code executes. The switch uses the stored configuration to initialize the switch. You
are prompted to confirm that the reset should proceed. The LEDs on the switch indicate a successful reset.
copy
The copy command uploads and downloads files to and from the switch. You can also use the copy command
to manage the dual images (primary and alternate) on the file system. Upload and download files from a server
by using FTP, TFTP, Xmodem, Ymodem, or Zmodem. SFTP and SCP are available as additional transfer methods
if the software package supports secure management.
Format
quit
Modes •Privileged EXEC
• User EXEC
Format
reload
Mode Privileged EXEC
Format
copy source destination
Mode Privileged EXEC