Command Reference Guide

Simple Network Time Protocol Commands
CLI Command Reference
September 2014 Page 201
HP Moonshot Switch Module CLI Command Reference
no sntp unicast client poll-interval
This command resets the poll interval for SNTP unicast clients to its default value.
sntp unicast client poll-timeout
This command will set the poll timeout for SNTP unicast clients in seconds to a value from 1-30.
no sntp unicast client poll-timeout
This command will reset the poll timeout for SNTP unicast clients to its default value.
sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients to a value from 0 to 10.
no sntp unicast client poll-retry
This command will reset the poll retry for SNTP unicast clients to its default value.
Format
no sntp unicast client poll-interval
Mode Global Config
Default 5
Format
sntp unicast client poll-timeout poll-timeout
Mode Global Config
Format
no sntp unicast client poll-timeout
Mode Global Config
Default 1
Format
sntp unicast client poll-retry poll-retry
Mode Global Config
Format
no sntp unicast client poll-retry
Mode Global Config