Command Reference Guide

Simple Network Time Protocol Commands
CLI Command Reference
September 2014 Page 203
HP Moonshot Switch Module CLI Command Reference
show sntp
This command is used to display SNTP settings and status.
show sntp client
This command is used to display SNTP client settings.
Format
show sntp
Mode Privileged EXEC
Term Definition
Last Update Time Time of last clock update.
Last Attempt
Time
Time of last transmit query (in unicast mode).
Last Attempt
Status
Status of the last SNTP request (in unicast mode) or unsolicited message (in broadcast
mode).
Broadcast Count Current number of unsolicited broadcast messages that have been received and processed
by the SNTP client since last reboot.
Format
show sntp client
Mode Privileged EXEC
Term Definition
Client Supported Modes Supported SNTP Modes (Broadcast or Unicast).
SNTP Version The highest SNTP version the client supports.
Port SNTP Client Port. The field displays the value 0 if it is default value. When the
client port value is 0, if the client is in broadcast mode, it binds to port 123; if the
client is in unicast mode, it binds to the port assigned by the underlying OS.
Client Mode Configured SNTP Client Mode.