Command Reference Guide

Time Zone Commands
CLI Command Reference
September 2014 Page 207
HP Moonshot Switch Module CLI Command Reference
Example: The following shows examples of the command.
(Routing) (Config)# clock summer-time date 1 nov 2011 3:18 2 nov 2011 3:18
(Routing) (Config)# clock summer-time date 1 nov 2011 3:18 2 nov 2011 3:18 offset 120 zone INDA
clock summer-time recurring
This command sets the summer-time recurring parameters.
Example: The following shows examples of the command.
(Routing) (Config)# clock summer-time recurring 2 sun nov 3:18 2 mon nov 3:18
(Routing) (Config)# clock summer-time recurring 2 sun nov 3:18 2 mon nov 3:18 offset 120 zone INDA
no clock summer-time
This command disables the summer-time settings.
offset The number of minutes to add during the summertime. The range is 1 to 1440.
acronym The acronym for the summer-time to be displayed when summertime is in effect. The
range is up to four characters are allowed.
Format
clock summer-time recurring {EU | USA | week day month hh:mm week day month hh:mm}
[offset offset] [zone acronym]
Mode Global Config
Parameter Description
EU The system clock uses the standard recurring summer time settings used in countries in the
European Union.
USA The system clock uses the standard recurring daylight saving time settings used in the
United States.
week Week of the month. The range is 1 to 5, first, last.)
day Day of the week. The range is the first three letters by name; sun, for example.
month Month. The range is the first three letters by name; jan, for example.
hh:mm Time in 24-hour format in hours and minutes. The range is hours: 0 to 23, minutes: 0 to 59.
offset The number of minutes to add during the summertime. The range is 1 to 1440.
acronym The acronym for the summertime to be displayed when summertime is in effect. Up to four
characters are allowed.
Format
no clock summer-time
Mode Global Config
Parameter Description