Command Reference Guide

Serviceability Packet Tracing Commands
CLI Command Reference
September 2014 Page 220
HP Moonshot Switch Module CLI Command Reference
debug aaa accounting
This command is useful to debug accounting configuration and functionality in User Manager.
no debug aaa accounting
Use this command to turn off debugging of User Manager accounting functionality.
debug aaa authorization
Use this command to enable the tracing for AAA in User Manager. This is useful to debug authorization
configuration and functionality in the User Manager. Each of the parameters are used to configure
authorization debug flags.
no debug aaa authorization
Use this command to turn off debugging of the User Manager authorization functionality.
Example: The following is an example of the command.
(Routing) #debug aaa authorization
Tacacs authorization receive packet tracing enabled.
(Routing) #debug tacacs authorization packet transmit
authorization tracing enabled.
(Routing) #no debug aaa authorization
AAA authorization tracing enabled
Format
debug aaa accounting
Mode Privileged EXEC
Format
no debug aaa accounting
Mode Privileged EXEC
Format
debug aaa authorization {commands | exec}
Mode Privileged EXEC
Format
no debug aaa authorization
Mode Privileged EXEC