Command Reference Guide

Serviceability Packet Tracing Commands
CLI Command Reference
September 2014 Page 221
HP Moonshot Switch Module CLI Command Reference
debug arp
Use this command to enable ARP debug protocol messages.
no debug arp
Use this command to disable ARP debug protocol messages.
debug clear
This command disables all previously enabled “debug” traces.
debug console
This command enables the display of “debug” trace output on the login session in which it is executed. Debug
console display must be enabled in order to view any trace output. The output of debug trace commands will
appear on all login sessions for which debug console has been enabled. The configuration of this command
remains in effect for the life of the login session. The effect of this command is not persistent across resets.
no debug console
This command disables the display of “debug” trace output on the login session in which it is executed.
Default disabled
Format
debug arp
Mode Privileged EXEC
Format
no debug arp
Mode Privileged EXEC
Default disabled
Format
debug clear
Mode Privileged EXEC
Default disabled
Format
debug console
Mode Privileged EXEC
Format
no debug console
Mode Privileged EXEC