Command Reference Guide

Serviceability Packet Tracing Commands
CLI Command Reference
September 2014 Page 223
HP Moonshot Switch Module CLI Command Reference
debug dhcp packet
This command displays debugging information about DHCPv4 client activities and traces DHCPv4 packets to
and from the local DHCPv4 client.
no debug dhcp
This command disables the display of “debug” trace output for DHCPv4 client activity.
debug debug-config
Use this command to download or upload the debug-config.ini file. The debug-config.ini file executes CLI
commands (including devshell and drivshell commands) on specific predefined events. The debug config file is
created manually and downloaded to the switch.
debug dot1x packet
Use this command to enable dot1x packet debug trace. Use the optional receive or transmit keywords to
specify whether to enable tracing for received or transmitted dot1x packets.
no debug dot1x packet
Use this command to disable dot1x packet debug trace.
Default disabled
Format
debug dhcp packet [transmit | receive]
Mode Privileged EXEC
Format
no debug dhcp packet [transmit | receive]
Mode Privileged EXEC
Default disabled
Format
debug debug-config {download <url> | upload <url>}
Mode Privileged EXEC
Default disabled
Format
debug dot1x [{receive | transmit}]
Mode Privileged EXEC
Format
no debug dot1x
Mode Privileged EXEC