Command Reference Guide

Serviceability Packet Tracing Commands
CLI Command Reference
September 2014 Page 227
HP Moonshot Switch Module CLI Command Reference
no debug ip vrrp
Use this command to disable VRRP debug protocol messages.
debug ipv6 dhcp
This command displays “debug” information about DHCPv6 client activities and traces DHCPv6 packets to and
from the local DHCPv6 client.
no debug ipv6 dhcp
This command disables the display of “debug” trace output for DHCPv6 client activity.
debug isdp packet
This command enables tracing of ISDP packets processed by the switch. ISDP must be enabled on both the
device and the interface in order to monitor packets for a particular interface. Use the optional
receive or
transmit keywords to specify whether to enable tracing for received or transmitted packets.
no debug isdp packet
This command disables tracing of ISDP packets on the receive or the transmit sides or on both sides.
Format
no debug ip vrrp
Mode Privileged EXEC
Default disabled
Format
debug ipv6 dhcp
Mode Privileged EXEC
Format
no debug ipv6 dhcp
Mode Privileged EXEC
Format
debug isdp packet [{receive | transmit}]
Mode Privileged EXEC
Format
no debug isdp packet [{receive | transmit}]
Mode Privileged EXEC