Command Reference Guide

Serviceability Packet Tracing Commands
CLI Command Reference
September 2014 Page 238
HP Moonshot Switch Module CLI Command Reference
no exception dump tftp-server
Use this command to reset the exception dump remote server configuration to its factory default value.
exception dump filepath
Use this command to configure a file-path to dump core file to a TFTP server, NFS mount or USB device
subdirectory.
no exception dump filepath
Use this command to reset the exception dump filepath configuration to its factory default value.
exception core-file
Use this command to configure a prefix for a core-file name. The core file name is generated with the prefix as
follows:
If
hostname is selected:
file-name-prefix_hostname_Time_Stamp.bin
If hostname is not selected:
file-name-prefix_MAC_Address_Time_Stamp.bin
If hostname is configured the core file name takes the hostname, otherwise the core-file names uses the MAC
address when generating a core dump file. The prefix length is 15 characters.
Format
no exception dump tftp-server
Mode Global Config
Default None
Format
exception dump filepath dir
Mode Global Config
Format
exception dump filepath
Mode Global Config
Default Core
Format
exception core-file {file-name-prefix | [hostname] | [time-stamp]}
Mode Global Config