Command Reference Guide

Serviceability Packet Tracing Commands
CLI Command Reference
September 2014 Page 240
HP Moonshot Switch Module CLI Command Reference
show exception
Use this command to display the configuration parameters for generating a core dump file.
Example: The following shows an example of this command.
(Routing) #show exception
Coredump file name............................. core
Coredump filename uses hostname................ FALSE
Coredump filename uses time-stamp.............. TRUE
TFTP server IP.................................
File path...................................... ./.
Protocol....................................... none
Switch-chip-register........................... FALSE
session start unit
Use this command to initiate a console session from the stack master to another unit in the stack. During the
session, troubleshooting and debugging commands can be issued on the stack master, and the output displays
the relevant information from the member unit specified in the session. The
unit-number range is 1 –2.
Default None
Format
show exception
Mode Privileged EXEC
Default Disable
Format
session start unit unit-number
Mode Global Config