Command Reference Guide

Support Mode Commands
CLI Command Reference
September 2014 Page 241
HP Moonshot Switch Module CLI Command Reference
Support Mode Commands
Support mode is hidden and available when the techsupport enable command is executed. techsupport mode
is disabled by default. Configurations related to support mode are shown in the
show tech-support command.
They can be persisted by using the command
save in support mode. Support configurations are stored in a
separate binary config file, which cannot be uploaded or downloaded.
techsupport enable
Use this command to allow access to Support mode.
console
Use this command to enable the display of support debug for this session.
save
Use this command to save the trace configuration to non-volatile storage.
snapshot ospf
Use this command in Support mode to dump a set of OSPF debug information to capture the current state of
OSPF. The output is written to the console and can be extensive
Default Disabled
Format
techsupport enable
Mode Privileged Exec
Default Disabled
Format
console
Mode Support
Format
save
Mode Support
Format
snapshot ospf
Mode Support mode