Command Reference Guide

Support Mode Commands
CLI Command Reference
September 2014 Page 242
HP Moonshot Switch Module CLI Command Reference
snapshot routing
Use this command in Support mode to dump a set of routing debug information to capture the current state
of routing on the switch. The output is written to the console and can be extensive.
snapshot system
Use this command in Support mode to dump a set of system debug information to capture the current state of
the device. The output is written to the console and can be extensive.
telnetd
Use this command in Support mode to start or stop the Telnet daemon on the switch.
Format
snapshot routing
Mode Support
Format
snapshot multicast
Mode Support
Format
telnetd {start | stop}
Mode Support