Command Reference Guide

sFlow Commands
CLI Command Reference
September 2014 Page 248
HP Moonshot Switch Module CLI Command Reference
Port........................................... 6343
Datagram Version............................... 5
Maximum Datagram Size.......................... 1400
Example: The following examples show CLI display output for the command when a receiver is configured
as a non-timeout entry.
(Routing) #show sflow receivers
Rcvr Owner Timeout Max Dgram Port IP Address
Indx String Size
---- -------------------------------- ---------- --------- ----- ---------------
1 tulasi No Timeout 1400 6343 0.0.0.0 <= No Timeout string
2 0 1400 6343 0.0.0.0
3 0 1400 6343 0.0.0.0
4 0 1400 6343 0.0.0.0
5 0 1400 6343 0.0.0.0
6 0 1400 6343 0.0.0.0
7 0 1400 6343 0.0.0.0
8 0 1400 6343 0.0.0.0
(Routing) #show sflow receivers 1
Receiver Index................................. 1
Owner String................................... tulasi
Time out....................................... No Timeout <= No Timeout string is added
IP Address:.................................... 0.0.0.0
Address Type................................... 1
Port........................................... 6343
Datagram Version............................... 5
Maximum Datagram Size.......................... 1400
show sflow samplers
Use this command to display the sFlow sampling instances created on the switch.
Format
show sflow samplers
Mode Privileged EXEC
Field Description
Sampler Data Source The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support
Physical ports only.
Receiver Index The sFlowReceiver configured for this sFlow sampler.
Packet Sampling Rate The statistical sampling rate for packet sampling from this source.
Max Header Size The maximum number of bytes that should be copied from a sampled packet to
form a flow sample.