Command Reference Guide

sFlow Commands
CLI Command Reference
September 2014 Page 249
HP Moonshot Switch Module CLI Command Reference
show sflow source-interface
Use this command to display the sFlow source interface configured on the switch.
Example: The following shows example CLI display output for the command.
(Routing) #show sflow source-interface
sFlow Client Source Interface.................. (not configured)
Format
show sflow source-interface
Mode Privileged EXEC
Field Description
sFlow Client Source
Interface
The interface ID of the physical or logical interface configured as the sFlow client
source interface.
sFlow Client Source IPv4
Address
The IP address of the interface configured as the sFlow client source interface.