Command Reference Guide

Remote Monitoring Commands
CLI Command Reference
September 2014 Page 254
HP Moonshot Switch Module CLI Command Reference
Example: The following shows an example of the command.
(Routing) (Config)# rmon hcalarm 1 ifInOctets.1 30 absolute rising-threshold high 1 low 100 status
positive 1 falling-threshold high 1 low 10 status positive startup rising owner myOwner
no rmon hcalarm
This command deletes the rmon hcalarm entry.
Example: The following shows an example of the command.
(Routing) (Config)# no rmon hcalarm 1
High Capacity Alarm
Rising-Threshold
Absolute Value High
The upper 32 bits of the absolute value for threshold for the sampled statistic. The
range is 0 to 4294967295. The default is 0.
High Capacity Alarm
Rising-Threshold Value
Status
This object indicates the sign of the data for the rising threshold, as defined by the
objects hcAlarmRisingThresAbsValueLow and hcAlarmRisingThresAbsValueHigh.
Possible values are valueNotAvailable, valuePositive, or valueNegative. The
default is valuePositive.
High Capacity Alarm
Falling-Threshold
Absolute Value Low
The lower 32 bits of the absolute value for threshold for the sampled statistic. The
range is 0 to 4294967295. The default is 1.
High Capacity Alarm
Falling-Threshold
Absolute Value High
The upper 32 bits of the absolute value for threshold for the sampled statistic. The
range is 0 to 4294967295. The default is 0.
High Capacity Alarm
Falling-Threshold Value
Status
This object indicates the sign of the data for the falling threshold, as defined by the
objects hcAlarmFallingThresAbsValueLow and hcAlarmFallingThresAbsValueHigh.
Possible values are valueNotAvailable, valuePositive, or valueNegative. The
default is valuePositive.
High Capacity Alarm
Rising Event Index
The index of the eventEntry that is used when a rising threshold is crossed. The
range is 1 to 65535. The default is 1.
High Capacity Alarm
Falling Event Index
The index of the eventEntry that is used when a falling threshold is crossed. The
range is 1 to 65535. The default is 2.
High Capacity Alarm
Failed Attempts
The number of times the associated hcAlarmVariable instance was polled on behalf
of the hcAlarmEntry (while in the active state) and the value was not available. This
object is a 32-bit counter value that is read-only.
High Capacity Alarm
Owner
The owner string associated with the alarm entry. The default is monitorHCAlarm.
High Capacity Alarm
Storage Type
The type of non-volatile storage configured for this entry. This object is read-only.
The default is volatile.
Format
no rmon hcalarm alarm number
Mode Global Config
Parameter Description