Command Reference Guide

Remote Monitoring Commands
CLI Command Reference
September 2014 Page 258
HP Moonshot Switch Module CLI Command Reference
Example: The following shows example CLI display output for the command.
(Routing) #show rmon alarm 1
Alarm 1
----------
OID: alarmInterval.1
Last Sample Value: 1
Interval: 1
Sample Type: absolute
Startup Alarm: rising-falling
Rising Threshold: 1
Falling Threshold: 1
Rising Event: 1
Falling Event: 2
Owner: MibBrowser
show rmon collection history
This command displays the entries in the RMON history control table.
Format
show rmon collection history [interfaces unit/slot/port]
Mode Privileged Exec
Parameter Description
Index An index that uniquely identifies an entry in the historyControl table. Each such entry
defines a set of samples at a particular interval for an interface on the device. The
range is 1 to 65535.
Interface The source interface for which historical data is collected.
Interval The interval in seconds over which the data is sampled. The range is 1 to 3600. The
default is 1800.
Samples Requested The requested number of discrete time intervals over which data is to be saved. The
range is 1 to 65535. The default is 50.
Samples Granted The number of discrete sampling intervals over which data shall be saved. This object
is read-only. The default is 10.
Owner The owner string associated with the history control entry. The default is
monitorHistoryControl.