Command Reference Guide

Remote Monitoring Commands
CLI Command Reference
September 2014 Page 261
HP Moonshot Switch Module CLI Command Reference
Example: The following shows example CLI display output for the command.
(Routing) #show rmon history 1 errors
Sample set: 1 Owner: myowner
Interface: 1/0/1 Interval: 30
Requested Samples: 10 Granted Samples: 10
Maximum table size: 1758
Time CRC Align Undersize Oversize Fragments Jabbers
--------------------- ---------- --------- --------- ---------- -------
Jan 01 1970 21:41:43 0 0 0 0 0
Jan 01 1970 21:42:14 0 0 0 0 0
Jan 01 1970 21:42:44 0 0 0 0 0
Jan 01 1970 21:43:14 0 0 0 0 0
Jan 01 1970 21:43:44 0 0 0 0 0
Jan 01 1970 21:44:14 0 0 0 0 0
Jan 01 1970 21:44:45 0 0 0 0 0
Jan 01 1970 21:45:15 0 0 0 0 0
Jan 01 1970 21:45:45 0 0 0 0 0
Jan 01 1970 21:46:15 0 0 0 0 0
History Control
Buckets Granted
The number of discrete sampling intervals over which data shall be saved. This object is
read-only. The default is 10.
History Control
Interval
The interval in seconds over which the data is sampled. The range is 1 to 3600. The
default is 1800.
History Control
Owner
The owner string associated with the history control entry. The default is
monitorHistoryControl.
Maximum Table Size Maximum number of entries that the history table can hold.
Time Time at which the sample is collected, displayed as period seconds.
CRC Align Number of CRC align errors.
Undersize Packets Total number of undersize packets. Packets are less than 64 octets long (excluding
framing bits, including FCS octets).
Oversize Packets Total number of oversize packets. Packets are longer than 1518 octets (excluding
framing bits, including FCS octets).
Fragments Total number of fragment packets. Packets are not an integral number of octets in length
or had a bad Frame Check Sequence (FCS), and are less than 64 octets in length
(excluding framing bits, including FCS octets).
Jabbers Total number of jabber packets. Packets are longer than 1518 octets (excluding framing
bits, including FCS octets), and are not an integral number of octets in length or had a
bad Frame Check Sequence (FCS).
Octets Total number of octets received on the interface.
Packets Total number of packets received (including error packets) on the interface.
Broadcast Total number of good Broadcast packets received on the interface.
Multicast Total number of good Multicast packets received on the interface.
Util Port utilization of the interface associated with the history index specified.
Dropped Collisions Total number of dropped collisions.
Parameter Description