Command Reference Guide

Remote Monitoring Commands
CLI Command Reference
September 2014 Page 263
HP Moonshot Switch Module CLI Command Reference
show rmon log
This command displays the entries in the RMON log table.
Example: The following shows example CLI display output for the command.
(Routing) #show rmon log
Event Description Time
------------------------------------------------
Example: The following shows example CLI display output for the command.
(Routing) #show rmon log 1
Maximum table size: 10
Event Description Time
------------------------------------------------
show rmon statistics interfaces
This command displays the RMON statistics for the given interfaces.
Format
show rmon log [event-index]
Mode Privileged Exec
Parameter Description
Maximum table size
Maximum number of entries that the log table can hold.
Event Event index for which the log is generated.
Description A comment describing the event entry for which the log is generated.
Time Time at which the event is generated.
Format
show rmon statistics interfaces unit/slot/port
Mode Privileged Exec
Parameter Description
Port unit/slot/port
Dropped Total number of dropped events on the interface.
Octets Total number of octets received on the interface.
Packets Total number of packets received (including error packets) on the interface.
Broadcast Total number of good broadcast packets received on the interface.
Multicast Total number of good multicast packets received on the interface.