Command Reference Guide

Port Configuration Commands
CLI Command Reference
September 2014 Page 271
HP Moonshot Switch Module CLI Command Reference
shutdown
This command disables a port or range of ports.
no shutdown
This command enables a port
.
shutdown all
This command disables all ports.
no shutdown all
This command enables all ports.
Note: You can use the shutdown command on physical and port-channel (LAG) interfaces, but not on
VLAN routing interfaces.
Default enabled
Format
shutdown
Mode Interface Config
Format
no shutdown
Mode Interface Config
Note: You can use the shutdown all command on physical and port-channel (LAG) interfaces, but not
on VLAN routing interfaces.
Default enabled
Format
shutdown all
Mode Global Config
Format
no shutdown all
Mode Global Config