Command Reference Guide

Spanning Tree Protocol Commands
CLI Command Reference
September 2014 Page 277
HP Moonshot Switch Module CLI Command Reference
no spanning-tree bpduflood
Use this command to disable BPDU Flood on the interface or range of interfaces.
spanning-tree bpduguard
Use this command to enable BPDU Guard on the switch.
no spanning-tree bpduguard
Use this command to disable BPDU Guard on the switch.
spanning-tree bpdumigrationcheck
Use this command to force a transmission of rapid spanning tree (RSTP) and multiple spanning tree (MSTP)
BPDUs. Use the
unit/slot/port parameter to transmit a BPDU from a specified interface, or use the all
keyword to transmit RST or MST BPDUs from all interfaces. This command forces the BPDU transmission when
you execute it, so the command does not change the system configuration or have a no version.
spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration that this switch
is currently using. The
name is a string of up to 32 characters.
Default disabled
Format
no spanning-tree bpduflood
Mode Interface Config
Default disabled
Format
spanning-tree bpduguard
Mode Global Config
Default disabled
Format
no spanning-tree bpduguard
Mode Global Config
Format
spanning-tree bpdumigrationcheck {unit/slot/port | all}
Mode Global Config
Default base MAC address in hexadecimal notation
Format
spanning-tree configuration name name
Mode Global Config