Command Reference Guide

Spanning Tree Protocol Commands
CLI Command Reference
September 2014 Page 281
HP Moonshot Switch Module CLI Command Reference
no spanning-tree max-age
This command sets the Bridge Max Age parameter for the common and internal spanning tree to the default
value.
spanning-tree max-hops
This command sets the Bridge Max Hops parameter to a new value for the common and internal spanning tree.
The max-hops value is a range from 6 to 40.
no spanning-tree max-hops
This command sets the Bridge Max Hops parameter for the common and internal spanning tree to the default
value.
Format
no spanning-tree max-age
Mode Global Config
Default 20
Format
spanning-tree max-hops 6-40
Mode Global Config
Format
no spanning-tree max-hops
Mode Global Config