Command Reference Guide

Switch Stacking
CLI Command Reference
September 2014 Page 29
HP Moonshot Switch Module CLI Command Reference
show slot
This command displays information about all the slots in the system or for a specific slot.
If you supply a value for
unit/slot, the following information appears:
Format
show slot [unit/slot]
Mode User EXEC
Term Definition
Slot The slot identifier in a
unit/slot format.
Status The slot is empty, full, or has encountered an error
Admin State The slot administrative mode is enabled or disabled.
Power State The slot power mode is enabled or disabled.
Configured Card
Model Identifier
The model identifier of the card preconfigured in the slot. Model Identifier is a 32-character
field used to identify a card.
Pluggable Cards are pluggable or non-pluggable in the slot.
Power Down Indicates whether the slot can be powered down.
Term Definition
Slot The slot identifier in a
unit/slot format.
Slot Status The slot is empty, full, or has encountered an error
Admin State The slot administrative mode is enabled or disabled.
Power State The slot power mode is enabled or disabled.
Inserted Card
Model Identifier
The model identifier of the card inserted in the slot. Model Identifier is a 32-character field
used to identify a card. This field is displayed only if the slot is full.
Inserted Card
Description
The card description. This field is displayed only if the slot is full.
Configured Card
Model Identifier
The model identifier of the card preconfigured in the slot. Model Identifier is a 32-character
field used to identify a card.
Configured Card
Description
A description of the card configured for the slot.
Pluggable Cards are pluggable or non-pluggable in the slot.
Power Down Indicates whether the slot can be powered down.