Command Reference Guide

Spanning Tree Protocol Commands
CLI Command Reference
September 2014 Page 293
HP Moonshot Switch Module CLI Command Reference
Example: The following shows example CLI display output for the command in unit/slot/port format.
(Routing) >show spanning-tree mst port detailed 0 1/0/1
Port Identifier................................ 80:01
Port Priority.................................. 128
Port Forwarding State.......................... Disabled
Port Role...................................... Disabled
Auto-calculate Port Path Cost.................. Enabled
Port Path Cost................................. 0
Auto-Calculate External Port Path Cost......... Enabled
External Port Path Cost........................ 0
Designated Root................................ 80:00:00:10:18:48:FC:07
Root Path Cost................................. 0
Designated Bridge.............................. 80:00:00:10:18:48:FC:07
Designated Port Identifier..................... 00:00
Topology Change Acknowledge.................... FALSE
Hello Time..................................... 2
Edge Port...................................... FALSE
Edge Port Status............................... FALSE
Point to Point MAC Status...................... TRUE
CST Regional Root.............................. 80:00:00:10:18:48:FC:07
CST Internal Root Path Cost.................... 0
Loop Inconsistent State........................ FALSE
Transitions Into Loop Inconsistent State....... 0
Transitions Out Of Loop Inconsistent State..... 0
Example: The following shows example CLI display output for the command using MST ID 1 and a LAG
interface number.
(Routing) #show spanning-tree mst port detailed 1 lag 1
MST Instance ID................................ 1
Port Identifier................................ 61:CD
Port Priority.................................. 96
Port Forwarding State.......................... Disabled
Port Role...................................... Disabled
Auto-calculate Port Path Cost.................. Enabled
Port Path Cost................................. 0
Designated Root................................ 80:01:00:24:81:D0:1D:96
Designated Port Cost........................... 0
Designated Bridge.............................. 80:01:00:24:81:D0:1D:96
Designated Port Identifier..................... 00:00
Loop Inconsistent State........................ FALSE
Transitions Into Loop Inconsistent State....... 0
Transitions Out Of Loop Inconsistent State..... 0