Command Reference Guide

Spanning Tree Protocol Commands
CLI Command Reference
September 2014 Page 296
HP Moonshot Switch Module CLI Command Reference
show spanning-tree summary
This command displays spanning tree settings and parameters for the switch. The following details are
displayed on execution of the command.
Example: The following shows example CLI display output for the command.
(Routing) >show spanning-tree summary
Spanning Tree Adminmode........... Enabled
Spanning Tree Version............. IEEE 802.1w
BPDU Guard Mode................... Disabled
BPDU Filter Mode.................. Disabled
Configuration Name................ ****
Configuration Revision Level...... ****
Configuration Digest Key.......... ****
Configuration Format Selector..... 0
No MST instances to display.
Format
show spanning-tree summary
Mode •Privileged EXEC
• User EXEC
Term Definition
Spanning Tree Adminmode Enabled or disabled.
Spanning Tree Version Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or IEEE
802.1d) based upon the Force Protocol Version parameter.
BPDU Guard Mode Enabled or disabled.
BPDU Filter Mode Enabled or disabled.
Configuration Name Identifier used to identify the configuration currently being used.
Configuration Revision Level Identifier used to identify the configuration currently being used.
Configuration Digest Key A generated Key used in the exchange of the BPDUs.
Configuration Format Selector Specifies the version of the configuration format being used in the exchange
of BPDUs. The default value is zero.
MST Instances List of all multiple spanning tree instances configured on the switch.