Command Reference Guide

Spanning Tree Protocol Commands
CLI Command Reference
September 2014 Page 297
HP Moonshot Switch Module CLI Command Reference
show spanning-tree vlan
This command displays the association between a VLAN and a multiple spanning tree instance. The vlanid
corresponds to an existing VLAN ID.
Example: The following shows example CLI display output for the command.
(Routing) >show spanning-tree vlan 1
VLAN Identifier................................ 1
Associated Instance............................ CST
Format
show spanning-tree vlan vlanid
Mode •Privileged EXEC
• User EXEC
Term Definition
VLAN Identifier The VLANs associated with the selected MST instance.
Associated
Instance
Identifier for the associated multiple spanning tree instance or “CST” if associated with the
common and internal spanning tree.